other
Blog
Home Blog

Blog

  • Maintenance of punching machine
    • April 14, 2021

    Maintenance of punching machine Punching machine repair technology is a very high-end technology. Generally, there are many reasons for the failure of punch presses. Personnel without professional maintenance level cannot start repairs, and maintenance personnel must have many aspects of knowledge and experience. Nowadays, science and technology are gradually advancing, and the use of punching mac...

  • The reason for the vibration of the punch itself
    • April 09, 2021

    The reason for the vibration of the punch itself The reason for the vibration of the punch machine itself is mainly formed by the loss of force during the transmission of the punch force. Specifically, because the punch needs to convert the circular motion of the motor into a vertical force, a part of the force will be lost during the force conversion process. , This part of the force will act on ...

  • Safe operation rules of mechanical punching machine
    • April 01, 2021

    Safe operation rules of mechanical punching machine The safe operation rules of mechanical punching press are as follows: 1. Please set up a safety warning sign near the mechanical punching machine. 2. Set up an isolation area around the equipment to form a work area During the working process of the equipment, there are moving parts protruding out of the platform. If someone accidentall...

  • Process analysis of laser cutting machine
    • March 23, 2021

    Process analysis of laser cutting machine 1. Melting cutting is to make the incident laser light speed irradiate the plate, when the laser power of the laser cutter reaches a certain critical value, the local area will be melted to achieve the cutting effect. 2. Vaporized cutting uses high-power density laser beams to heat the processed materials to avoid the slag burrs formed by melting caused by...

  • The influence of servo motor operation on laser cutting machine
    • March 16, 2021

    The influence of servo motor operation on laser cutting machine Regarding the laser cutting machine, whether it is flat cutting or pipe cutting, if the equipment is to be processed in accordance with the established graphics, the key lies in the dynamic response of each axis involved in the processing and the coordination of each other. If during the machining process, the overall response of each...

  • The CNC controller for Fiber laser cutting machine
    • March 10, 2021

    The CNC controller for Fiber laser cutting machine The CNC controller of the fiber laser cutting machine plays a very important role. Below, I will introduce the following commonly used controllers: 1. The PIC system is an older board control system, which can be integrated into an ordinary computer to run and use background software to control analog signal transmission. Although the control...

  • Reasons and solutions for the unsynchronization of hydraulic bending machine up and down
    • March 02, 2021

    Reasons and solutions for the unsynchronization of hydraulic bending machine up and down The hydraulic transmission system of hydraulic bending machine has many advantages, so it has been widely used in various mechanical equipment, but in actual production, with the continuous increase in the number of uses, some typical faults have also appeared to be troublesome. If the hydraulic cylinder is no...

  • How to choose a the controller of press brake-open loop or closed loop?
    • February 24, 2021

    How to choose a the controller of press brake-open loop or closed loop? The hydraulic control system of the press brake is composed of hydraulic control and sensors. The hydraulic control and energy conversion part usually refers to hydraulic control valves, hydraulic pumps, etc. Hydraulic control technology is an important branch of automatic control system. The hydraulic control system has many ...

  • Reasons and solutions for the slider sometimes unable to return when bending
    • February 03, 2021

    Reasons and solutions for the slider sometimes unable to return when bending Reasons for failure of CNC bending machine: 1. No return without load, it may be a parameter problem or hydraulic failure; 2. It cannot return during processing, and the workpiece angle has not reached the set value; 3. It cannot return during processing, and the angle of the workpiece has exceeded the set value Solution ...

    a total of

    9

    pages

Copyright © 2015-2021 Anhui Aoxuan Heavy Industry Machine Co.,Ltd.All Rights Reserved.

top

leave a message

leave a message

    If you are interested in our products, please leave a message here, you will know more details.