other
Blog

Attention for Safe debugging of CNC Hydraulic Press Brake Machine Molds

  • 2020-04-29 09:48:16

The hydraulic press brake machine mold is composed of many parts, so the state of the equipment must be checked during installation, and strictly follow the steps. At the same time, pay attention to safety during installation and commissioning, so the CNC hydraulic press brake machine mold is installed The steps of debugging are critical.


Installation and debugging process of CNC hydraulic press brake machine mold:


1. Before adjusting the machine, you must first adjust the performance of the machine. This process must be carried out patiently and carefully, check whether the machine is dusty and used iron debris, etc., perform the necessary cleaning to reduce Later troubles.


2. The adjustment of the stroke of the slider, pay attention to check the thickness of the mold and check whether the ratio of the upper and lower modules is normal. Normally, the module should be controlled at the switching point of the stroke line. This must be paid attention to.


3. The adjustment of the travel module is to adjust the upper limit point of the module. When the module reaches the highest point, set the switch, and reserve the position where the slider stays, and also decelerate when descending. Modules to better protect machines and molds.

CNC Hydraulic Press Brake Machine

4. The adjustment of the gap is mainly to measure the distance between the upper module and the lower module first, and the specific gap is determined according to the folded sheet.

5. Angle adjustment. This angle adjustment has a certain relationship with the product. Generally speaking, the 90°mold is folded, then the middle angle must be greater than the angle on both sides, then its tightness can be adjusted according to the adjustment screw. Can adjust the pressure through the pressure gauge to avoid mold breakage.


Copyright © 2015-2020 Anhui Aoxuan Heavy Industry Machine Co.,Ltd.All Rights Reserved.

top

leave a message

leave a message

    If you are interested in our products, please leave a message here, you will know more details.