other
Blog

Multi-function Combined punching and shearing machine parts introduction

  • 2020-01-13 14:24:00


Combined punching and shearing machine


Combined punching and shearing machine is the use of hydraulic transmission device, using the special blade and mold to cut, punch, die shear the plate steel, square steel, round steel, Angle steel, channel steel, I steel for . Combined punching and shearing machine ( ironworker) is also called multi-function combined punching and shearing machine, this machine is equipped with many parts. Different parts have different operation functions; Each part can be configured with a different blade and die according to the requirements of the workpiece. And its machine general standard blade mold and parts there are several kinds.


First, the cutting blade

The punching and shearing machine is equipped with 5 kinds of blades and molds, which are: punching and shearing machine line scissors, punching and shearing machine Angle steel blades, punching and shearing machine pattern scissors, punching and shearing machine horizontal scissors, a total of 11 pieces and punching and shearing machine down punch and so on.


1. Punching die

Punch dies are divided into upper and lower dies.Its unique structure allows for precise punching of large Angle and channel steels.You can also choose the bending machine mold to fold the workpiece into the desired Angle.


2, Angle steel shear blade

Angle shear blade can be cut from the bottom and the end of 45 degree Angle.The diamond blade ensures high quality shear, i.e., minimum deformation and loss of shear material, with 45 degree shear from the top and bottom. Round steel, square steel shear site with a number of different sizes of holes.


3. Channel steel blade

Shearing different channel steel with different channel steel blades is feasible for flat steel shearing, easy to adjust the pressing foot to ensure accurate shearing of 15" graduated square block as the standard equipment. High quality shear blade for anti-deformation.The lower blade has four edges, and there are screws to adjust the pressure gap.


4. Mold scissors

Die scissor blade can be cut at different angles, channel steel blade, square steel blade, round steel blade, Angle steel blade, four kinds of blades can be arbitrarily interchangeable square steel round steel template, Angle template, channel steel template and other punching and shearing parts


1. Punch parts punch parts of the lack of material device with a large range of Windows, easy to operate rotating design, two large with ruler of the baffle plate as the standard accessories.Quick change of the nut and screw sleeve for easy replacement of the upper and lower die.


2. Parts of die shear

The unique lack of juice makes this part of the Angle and flat steel processing shear electrical linkage safety protection operator maximum safety, ventilation protection device to ensure the operator maximum visual range.The three blocks ensure accurate positioning.


3. Shear position of Angle steel

The Angle shear blade can be used to shear 45 degree Angle steel from the end and the bottom.The diamond blade ensures high quality shear, i.e., minimum deformation and loss of shear material, with 45 degree shear from the top and bottom.Round steel, square steel shear parts with a number of different sizes of holes, adjustable pressing device for cutting various sizes of shape steel, channel i-steel, blade can be selected.The large standard square baffle is convenient for plate material shear.Large lock nut.Precise square steel shear.Large and strong protective devices ensure maximum safety.Angle iron bending function.

Above is the introduction of the important components of the combined punching and shearing machine, I hope to help you understand the machine.

Copyright © 2015-2020 Anhui Aoxuan Heavy Industry Machine Co.,Ltd.All Rights Reserved.

top

leave a message

leave a message

    If you are interested in our products, please leave a message here, you will know more details.