Usage of CNC bending machine

  • 2020-03-25 14:38:49

Servo motor under drive cnc hydraulic press brake bending machine for stainless steel carbon steel

CNC press brake use method is some of the customer's concern point, Hydraulic CNC bending machine use by the wire on the coil electrified, electrified on the pressure plate generated gravity, so as to achieve the clamping between the plate and the base of the thin plate.

CNC bending machine

1. First, turn on the power, open the key switch on the control panel, and then press the oil pump to start, so that you can hear the rotation of the oil pump. (the machine is not working).

2. Stroke adjustment, pay attention to adjust the stroke, before bending must be tested. There must be a thickness gap between the upper die and the lower die.

Otherwise it will cause damage to the mold and machine. The adjustment of stroke also has electric quick adjustment and manual stomach adjustment.

3. Bending groove selection, generally to choose 8 times the width of the plate thickness of the slot. If the bending of 4mm sheet material, need to choose about 32 slots.

4. After the material adjustment is generally electric quick adjustment and manual fine-tuning, the method with the shearing machine.

5. Step on the foot switch to start bending, CNC bending machine mold and shearing machine, can be released at any time, release the foot will stop, continue to step down.

Plastic CNC bending machine mold, plastic folding machine, plastic sheet CNC bending machine mold, plastic sheet bending plastic sheet bending directly bending, no splicing, no need for grooving, no need for welding rod.

Its folding Angle appearance is nice and watertight, it will be manual welding into automatic machine operation, improve the quality, improve labor efficiency, reduce labor cost, greatly shorten the production time.

Copyright © 2015-2020 Anhui Aoxuan Heavy Industry Machine Co.,Ltd.All Rights Reserved.


leave a message

leave a message

    If you are interested in our products, please leave a message here, you will know more details.