other
News
Home News

How to use the press brake?

Hot Products

our enquiry

    If you are interested in our products, please leave a message here, you will know more details.

How to use the press brake?

  • Jun 01, 2018

How to use the press brake?


According to the ordinary hydraulic press brake processing Q235 plate to do a simple introduction:


1. First, switch on the power, open the key switch on the control panel, and then press the oil pump to start.

2, Stroke adjustment, the use of the bending machine must pay attention to the adjustment of the stroke, before bending must be tested.Bending machine die down to the bottom must ensure that there is a thick clearance.Otherwise, the mold and the machine will be damaged.The adjustment of the stroke is also electric fast adjustment and manual fine-tuning.

3, Bending groove selection, generally choose the plate thickness of 8 times the width of the groove.If the bending of 4mm plate, need to choose about 32 notch.

4, The rear baffle adjustment is generally electric fast adjustment and manual fine tuning, the same method as the shearing machine.

5, Step on the foot switch to start bending, bending machine and shear machine, can be released at any time, release the foot bending machine will stop, then continue to step down.

Copyright © 2015-2020 Anhui Aoxuan Heavy Industry Machine Co.,Ltd.All Rights Reserved.

top

leave a message

leave a message

    If you are interested in our products, please leave a message here, you will know more details.